Plug one end of the Ethernet cable into the ethernet jack on the wall and the other end into the computer.
NOTE: There is one connection provided per tenant which is tied to your username and password. If you have multiple devices in your apartment, you will need a router. The router then splits that connection and allows you to connect devices to it. If you try to use the same username and password on multiple devices without a router, you will continually be directed to the Dojo Networks login screen.
You will need to open your web browser (Internet Explorer or Firefox ) and try to go to a web page like www.google.com. You should then see the screen on left. Enter your username and password provided by Dojo Networks and then click ‘Connect’.
You should now see the screen on right. You will now need to reboot your computer (and/or Router) and then your computer should be registered with the network and you should be able use the Internet.
If you are using a router, you will need to connect your router’s WAN port (or internet port) to the Ethernet port on the wall. You will need to setup your router to get its IP using DHCP. Please refer to your Router’s documentation. You will need to access the sign-in screen as above from behind your router (connected to it either wired or wirelessly) one time using your provided username and password. You will then need to reboot your router (unplug it for 30 seconds) one time after seeing the “Congratulations” Screen.
When you setup your router for wireless access, please make sure to set a unique SSID. Don’t leave it the default like, ‘linksys’ or ‘netgear’ . Also, set some sort of authentication to secure the wireless connection. We recommend WPA or WPA2. If you don’t do this, you may have problems accessing the internet or logging in at all.
Dojo Networks strongly recommends that you secure your wireless router
to protect yourself from unauthorized access to your computer or internet
service. Please refer to your router's manual for setup procedures.